Specifications

To check our latest prices call 08706 030303 or visit www.calumetphoto.co.uk
23
Calumet Triple Hook
B
ackground Holder
Holds three Expansion Drive sets.
Bolt them to the wall or attach
them to Studio Clamps. MF6833
STUDIO CLAMPS, STUDS & ACCESSORIES
Calumet Studio Clamp
This heavy-duty, multi-purpose clamp can be
used to attach light heads to stands, pipes or
anything up to 2.25" (6cm) diameter. It
features a 5/8" (2cm) stud and will accept a
wide variety of accessories that extend the
uses of this indispensible tool even more.
MF6820
Calumet Studio
Clamp Grip Head
A heavy-duty, multi-purpose clamp that can
be mounted to a 2.5" (6cm) grip head. Used
to attach light heads to stands, pipes or
anything up to 2.25" (2cm) diameter. It
accepts 5/8" (2cm) round extension arms and
the grip head position can be rotated.
MF6821
Calumet Mini Clamp
Small yet sturdy clamp attaches to most light
stands, tripods and backdrop supports and
opens to 1.1" (3cm). Will accept a variety of
mounting studs to attach flash heads, lights
or cameras. MF6819
Calumet Extension Arm
Mounts to Studio Clamp to hold light-weight
fixtures or props in position without locking.
Measures 8" (20cm) long and 0.5" (1.2cm) in
diameter, with a 5/8" (2cm) hexagonal stud
with a 3/8" (1cm) female thread at one end
and a 5/8" (2cm) stud with a 1/4-20 male
thread at the other end. MF6826
Calumet U-Hook
Crossbar Holder
Use two of these handy hooks in Studio
Clamps to hold a crossbar for backgrounds.
Set of two U-Hooks. MF6828
Calumet Umbrella Adapter
with Hot Shoe
Holds any shoe-mounted flash unit with an
umbrella. It fits nearly any light stand with its
5/8" female mount and a reversible, 3/8" and
1/4-20 threaded female mount insert. Its
swivel joint allows you to tilt head and
umbrella up to 180°. MF6829
Calumet Swivel
Umbrella Adapter
This adjustable-angle adapter provides
a 5/8" female mount both top and bottom,
plus one adapter with 1/4-20 and 3/8" male
threads, one with 1/4-20 and 3/8" female
threads, and a locking receptacle that will
hold umbrella shafts up to nearly 0.5"
(1.3cm) diameter. MF6830
Calumet Flash Shoe Adapter
With 1⁄4-20 Female Thread
Adapt your tripod or any 1/4-20 mount
to accept any shoe-mount flash. Features a
thumbscrew lock to hold your flash securely
in place. MF6840
Calumet Rapid Stand Adapter
For 1⁄4-20 Thread
Mounts onto any 5/8" post and provides a
1/4-20 threaded stud with backing nut.
MF6808
Calumet Rapid Stand Adapter
For 3⁄8-16 Thread
Mounts on any 5/8" (2cm) posts and provides
a 3/8" threaded male stud with backing nut.
MF6809
Calumet Studio Clamp with Ball
Head and Flash Shoe
Features a fully functional miniature ball head,
which includes a standard flash hotshoe
fitting, this useful accessory will allow you to
position an off-camera flash unit virtually
anywhere you want in the studio or on
location. MF6822F