Use and Care Manual

LH400ATV-2B OWNER’S/OPERATOR’S MANUAL 08.0
17. TROUBLESHOOTING
17-3
NOTE:
The following troubleshooting does not cover all the possible causes of trouble.
It should be helpful, however, as a guide to troubleshooting. Refer to the
relative procedure in this manual for inspection, adjustment and replacement
of parts. Adjustment and replacement must be done by your dealer.
STARTING FAILURE/ HARD ATARTING
FUEL SYSTEM
Fuel tank
Empty
Clogged fuel tank breather hole
Deteriorated fuel or fuel containing
water or foreign material
Carburetor Air cleaner
Deteriorated fuel or fuel containing Clogged air cleaner
Water or foreign material element
Clogged pilot jet Improper air cleaner
Clogged air passage setting
Improperly set pilot air s crew
Clogged pilot air passage
Improperly sealed valve seat
Improperly adjusted fuel level
Clogged starter jet
Sucked-in air
COMPRESSION SYSTEM
Cylinder and cylinder head Valve system
Loose spark plug Improperly adjusted valve
Loose cylinder head clearance
Broken cylinder head gasket Improperly sealed valve
Broken cylinder gasket Improperly contacted
Worn, damaged or seized cylinder valve and vale seat
Piston and Piston ring Improper valve timing
Worn piston Broken valve spring
Worn fatigued or broken piston ring Seized valve
Seized piston ring
Seized or damaged piston