Use and Care Manual

LH400ATV-2B OWNER’S/OPERATOR’S MANUAL 08.0
16. MAINTENANCE
16-21
1. Use bulb 12V 35W/35W.
2. Pull the cable plug off the conducting strip in the socket.
3. Turning the headlight rear cover ① counterclockwise is to open the cover.
4. Change the bulb.
16. MAINTENANCE
Taillight /Brake light Lamp Replacement
If the taillight / brake light does not work the lamp may need to be replaced.
1. Remove the lens.
2. Remove lamp and replace it with
recommended lamp.
3. Test the taillight/ brake light to see
that it’s working .
4. Reinstall the lens.
Indicator Lamp Replacement
1. Remove mounting panel.
2. Unplug light from harness, depress locking tabs (A) and remove from pod.
3. Install new light and reassemble panel.
High beam Headlight Adjustment
The High beam headlight can be adjusted up and down.