Use and Care Manual

LH400ATV-2B OWNER’S/OPERATOR’S MANUAL 08.0
7. CONTROL AND PARTS FUNCTIONS
7-8
NOTE: Always follow the manufacturer’s mixing recommendations for the
freeze protection required in your area.
Cooling System
WARNING
Never remove the pressure cap when the engine is warm or hot. Escaping
steam can cause severe burns. The engine must be cool before removing the
pressure cap.
Radiator Coolant Level Inspection
NOTE:This procedure is only
required if the cooling system
has been drained for maintenance
and/or repair. However, if the
recovery bottle has run dry, the
level in the radiator should be
inspected and coolant added if necessary.
NOTE: Use of a non-standard pressure cap will not allow the recovery system
to function properly. If the cap should need replacement contact your dealer for
the correct replacement part. To insure that the coolant maintains its ability to
protect the engine, it is recommended that the system be completely drain
every two years and a fresh mixture of antifreeze and water be added.
Using a funnel, slowly add coolant as necessary through the radiator filler
neck.