Specifications

29
liquid temperature calibration baths
Choice of liquids
Some liquids can be hazardous when used in thermostatic baths. The user should ensure that
due regard is paid to the flash-point and other characteristics of the chosen liquid. This table does
not represent the recommendations of Techne but may be of assistance to the user in making an
initial selection.
Liquid Bath Accessories
Cooling coil
Connects to the mains water supply; the water being circulated through the coil should be at
least 5°C cooler than the set of the bath temperature. (Fits to any TE or TU unit).
Flat and gabled lids
Manufactured of stainless steel and available to fit all sizes of temperature controlled bath to help
prevent evaporation losses. Gabled lids provide extra working headroom within the bath.
Adjustable trays
Supported by a ball chain and clip the stainless steel trays can be used to alter the depth of the
bath.
Polypropylene spheres
A ball blanket is an effective way of reducing evaporation and loss of heat from a water bath.
It acts as effectively as a lid, whilst providing instant access to the bath. The 25mm diameter
spheres are supplied in packs of 250.
Ordering Information
Flat Lids Description
FFLAT08 8 litre size
FFLAT12 12 litre size
FFLAT18 18 and 26 litre size
FFLAT48 48 litre size
Gabled Lids
FGABLE08 8 litre size
FGABLE12 12 litre size
FGABLE18 18 and 26 litre size
FGABLE48 48 litre size
Adjustable Trays
FADJ08 8 litre size
FADJ12 12 litre size
FADJ18 18 litre size
FADJ26 26 litre size
FADJ48 48 litre size
Accessories
FTWORKS TechneWorks CD-ROM
F840D Polypropylene spheres, 250x25mm diameter
Hydrocarbon oils (Various)
Silicone oils
Silicone oil 210H/100CS
50/50 Water/Ethylene glycol
Water
Polyethylene glycol 200
Polyethylene glycol 400
Low Temperature Bath Fluid
High Temperature Bath Fluid
260ºC 200ºC 100ºC 0ºC -40ºC
FHTFLO
FHTFHI