Specifications

26
liquid temperature calibration baths
Dip and Flow Coolers
The Techne Dip and Flow Coolers work in conjunction with a Techne thermoregulator (see pages
24 and 25). The bath liquid flows through the unit which continually extracts heat from the bath
fluid by means of the heat exchanger which is built into the unit. The cooling head of the Techne
Dip Cooler fits neatly and unobtrusively into the corner of the bath and can be secured with a
specially designed mounting bracket (supplied).
Techne Dip and Flow coolers are designed for use when ambient temperatures down to -35°C are
required.
● Four models
● Compact refrigeration units for achieving temperatures down to -35°C*
● Cooling head of the Dip Cooler fits neatly into the corner of a Techne liquid bath (RU Series
Dip Coolers)
● Designed for use with Techne liquid baths
Technical Specification
Cooling (at 20ºC ambient) FC-200 FC-500 RU-200 RU-500
Minimum achievable temperature -20 °C -35 °C -20 °C -35 °C
Cooling capacity: 20°C (Watts) 140W 210W 145W 240W
Cooling capacity: 0°C (Watts) 140W 210W 145W 240W
Cooling capacity: -10°C (Watts) 110W 200W 110W 230W
Internal capacity (ml) 200ml 200ml – –
Nominal dimensions
(excluding handles/coil) Overall (mm) - width 235 370 235 370
length 420 430 420 430
height 300 325 300 325
Coil dimensions (mm) length – – 85 85
diameter – – 75 75
Hose length to coil (mm) – – 1250 1250
Shipping weight 19 39 19 39
*At an ambient of 20°C, using a mixture of 40% water, 40% antifreeze and 20% ethanol
Ordering Information
Model
#
Product Code Description
Circulators and flow coolers
FC-200 FFC2D FC-200 flow cooler, -20°C
FC-500 FFC5D FC-500 flow cooler, -35°C
Dip coolers
RU-200 FRU2D RU-200 dip cooler, -20°C
RU-500 FRU5D RU-500 dip cooler, -35°C
RU-200 and RU-500 models
FC-200