Specifications

liquid temperature calibration baths

Water Baths

A comprehensive range of temperature controlled water baths are available from Techne. Twenty

different water bath combinations allow the use of accurate temperatures from

-40°C up to 200°C; ensuring a solution for most laboratory applications.

First select the unheated stainless steel bath (see page 23) which has the appropriate volume for

the application, for example B-26 which has a volume of 26 litres.

Then add a thermoregulator (see page 24-25) which is suitable for the required temperature

range, for example the TE-10D Tempette is a digital thermoregulator for temperatures between

-40°C and 120°C.

Select any accessories that are required, for example; both gabled and ﬂat lids are available for all

bath sizes. Gabled lids allow particularly tall tubes to be accommodated.

If sub-ambient temperatures are required it is necessary to add a cooling mechanism to the bath.

Techne recommends the use of a dip or ﬂow cooler for temperatures down to -35°C. For example

the RU-200 can lower temperatures down to -20°C. It is also possible to use the cooling coil with

a water supply for temperatures from 5°C above the water temperature to ambient.

To assemble the complete system shown opposite the following products are required:

Product Description

Code

FBATH26 B-26 stainless steel bath, 26 litre capacity

FTE10DDC TE-10D, digital thermoregulator

FFLAT18 Flat lid for 18 or 26 litre bath

FRU2D RU-200 dip cooler