Specifications

tecal portable dri-block
®
calibrators
14
Portable Dri-Block
®
Calibrator model CE-350
The CE-350 is a low-cost alternative to the Tecal 425 models where routine checking of RTD and
thermocouples is required.
For some applications, it is important that the unit is very portable (the CE-350 weighs only
1.5kg) and can calibrate the sensors as quickly as possible (can heat and cool over the tempera-
ture range in a matter of minutes).
Typical applications where the CE-350 can be used are in checking fire alarm detectors, industrial
ovens, dryers, etc.
● Large block in 12 formats with custom options also available
● Maximum temperature 350°C
● An independent over temperature cut-out
● Temperature sensor burnout protection
● Separate heater on/off switch for fast cool down without changing
set temperature
● Indicators for over temperature cut-out and heater power
● IS0 9001 and CE marked
● Switchable °C/°F
● Three year warranty
● Calibration depth 101 mm
Technical Specification
Temperature range 20°C above ambient to 350°C
Working ambient 10°C to 30°C
Heat up 20°C to 300°C 5.2 minutes (230v version only)
Cool down 300°C to 100 10.8 minutes°C
Stability @ 100°C ±0.10°C
Stability @ 200°C ±0.15°C
Accuracy 100-300°C ±1°C
Accuracy below 100°C ±0.5°C
Display resolution 0.1°C
Fan cooling Automatic
Weight 1.5 kg
Dimensions H x W x D, mm 72 x 128 x 178 (excluding handle)
Power supply 230v 50/60Hz 2A or 120v 50/60Hz 4A
Watts 400w
Ordering Information
Product Block Options Block Type Voltage
Code
FCE350AD 4 x 6mm A 230V
FCE350AP 4 x 6mm A 120V
FCE350BD 1 x 10mm, 8mm, 6mm, 4.5mm 3mm B 230V
FCE350BP 1 x 10mm, 8mm, 6mm, 4.5mm 3mm B 120V
FCE350CD 2 x 6mm, 2 x 10mm C 230V
FCE350CP 2 x 6mm, 2 x 10mm C 120V
FCE350DD 4 x 1/4” D 230V
FCE350DP 4 x 1/4” D 120V
FCE350ED 1 x 3/8”, 5/16”, 1/4”, 3/16”, 1/8” E 230V
FCE350EP 1 x 3/8”, 5/16”, 1/4”, 3/16”, 1/8” E 120V
FCE350FD 2 x 1/4” 2 x 3/8” F 230V
FCE350FP 2 x 1/4” 2 x 3/8” F 120V
Accessories
6103526 Soft carry case
CE-350
Block A Block B
Block C
Block E
Block D
Block F