Specifications

tecal portable dri-block
®
calibrators
tecal portable dri-block
®
calibrators
TechneWorks
TechneWorks is an easy to use control software for many of our RS-232 compatible products. This
software has been designed to supersede the existing Calsoft and Thermsoft software packages.
It will allow customers to carry out all the tasks previously available on Calsoft and Thermsoft, plus
many new options on one new package. It is fully compatible with all Techne RS-232 Calibration
products including all current models and older discontinued models such as the TU-20C.
Compatible units are as follows:
Dri-Block Calibrators - Tecal H, S and F models
- Tecal 1200S High temperature Furnace
Thermoregulators - TU-20D and TU-20HT (and TU-20C)
Precision Digital Thermometer - Accu-Temp with RS-232 communication option
Fluidized Baths - FB-08C and TC-8D with RS-232 communication option
TechneWorks software allows connection to a range of Precision Thermometers, such as the Techne
Accu-Temp, ASL model F250, Accu-Temp II and the Cropico 3000 series. TechneWorks software
enables you to calibrate thermometers and sensors by comparison to one of the above listed
thermometers using a Techne liquid bath or dry block as a temperature source. Alternatively, the
bath or dry block calibrator display can be used as the reference. After data is collected, a calibration
certi cate can be printed.
Software Features
ALL MODELS
- Create, open and save programs with up to 20 set points.
- Specify either °C or °F.
- Specify ramp rates and hold times.
- Log data from the instrument while connected to the computer and export the data in an Excel
spreadsheet.
- Open, save, view and print logged data.
- Perform a calibration where temperature of the probe is manually entered.
- Perform an automatic calibration routine where the temperature reference probes data is added
automatically.
- Run a program in real time mode.
- Specify the logging interval from every 5 seconds to 60 seconds
- Free download from website
TECAL H MODELS ONLY has above features plus the following:
- Perform a calibration using the User Probe Interface
- Perform a calibration requiring a switch test
- Send programs to the calibrator
- Retrieve programs from the calibrator
- Retrieve test results from the calibrator
- Erase test results
(downloadable free of charge from www.techneusa.com)
- Note: CD with software included with Tecal H and TU-20HT models
Utilities button is only available on enabled version.
10