Specifications

tecal portable dri-block
®
calibrators
9
tecal portable dri-block
®
calibrators
Tecal 1200S High Temperature Portable
Calibration Furnace
Calibrate with con dence with the Tecal 1200S High Temperature Portable Calibration Furnace! When
precise temperature control is essential for optimum performance, you can count on Techne thermal
solutions.
Key Features
- Economically priced
- Wide temperature range
- Simple to use
- Multi-hole insert block for accurate comparison calibration
- Rapid heating rates
- Software available
- Rugged case with carry handle
- NIST Traceable calibration certi cate
The Tecal 1200S Calibration Furnace utilizes a special heater design for optimum temperature
uniformity and rapid heating rates. The isothermal block assembly is machined from a special alloy
giving excellent thermal conductivity which also resists high-temperature oxidation. This block is
designed to optimize performance between su cient mass for good stability/uniformity but a low
enough mass to achieve rapid heating/cooling rates and stabilization periods.
Technical Speci cations
Minimum temperature 400°C
Maximum temperature 1200°C
Display accuracy ±3°C
Temperature uniformity ±0.2°C
Temperature stability ±0.2°C (at 1200°C after 20 mins)
Display resolution 0.1°to 999.9 then 1°to 1200°C Selectable °C or °F
Heating rate, 100°C to 1200°C 20 minutes
Cooling rate, 1200°C to 200° 140 minutes
Large insert size Ø1.3” x 6.1”
Fan cooling Automatic
Dimensions (W x D x H) 20 x 30 x 35 cm
Weight 22 lbs
Ordering Information
FDB1200XS Tecal 1200S 230V with RS-232
FDB1200XP Tecal 1200S 120V with RS-232
Accessories
FCAL1200 Hard Carry case 1200S
Insert blocks Ø1.3” x 6.1” long
FINS1200C Insert Block probe Ø1/8”,Ø1/4”, Ø3/16”, Ø5/16”, Ø3/8”
FINS1200D Insert Block probe 2xØ3/16”,2xØ1/4”, 2xØ3/8”
FINS1200E Insert Block probe 6x Ø1/4”
Ceramic Top insulator*
FCER1200C Insulator C for block Ø1/8”, Ø1/4”, Ø3/16”, Ø5/16”, Ø3/8”
FCER1200D Insulator D for block 2 x Ø3/16”,2 x Ø1/4”, 2 x Ø3/8”
FCER1200E Insulator E for block 6 x Ø1/4”
FCAL1200 Hard carry case 1200S
5030103 Traceable Calibration at 400, 600, 800, 1,000 & 1,200°C
*Specify appropriate insulator for insert being ordered.
1200S