Owner`s manual

12
16. Open the hood and spark test each burner electrode by pushing inwards and turning anti-clockwise each knob in turn. Reset the knob
to the off position after each test. The gap between the tip of the electrode and burner should be between 4 to 5mm. Place the Flame
tamer (20) to the positions as in the pictures.
4 BURNER BBQS
20
6 BURNER BBQS
20
RB BURNER BBQS
20
17. Place the Cooking grill (21), Cooking plate (22), Deep dish (35 - only if applicable) and Warming rack (23) to the frame body as in the
diagrams.
Note! The cooking plate and deep dish must not be used at the same time.
21
22
23
21
22
23
21
23
35
For Models With a Rear Burner
Place the Igniter cable onto the pulse terminal. Check this connection by depressing the pulse button and looking at the rear burner
electrodes. Refer to Rear Burner Lighting Instructions for inserting/changing the battery.