User's Manual

20
The Bluetooth
mode is not
working.
Ensure that the Power button on the mi-
crophone has been turned on and that
the Music Volume (5) is turned up.
Check the instructions in the “Playback
and Music” section above to ensure that
your preferred mode is connected prop-
erly (remember especially that you may
need to press the Mode button (8) again
to cycle through the correct mode).
Ensure you have connected your device
to “Masingo” NOT “Masingo LED.” “Mas-
ingo LED” is only for the LED function
board.
If there is still no audio output, please
charge the microphone.
The AUX mode is
not working.
Ensure that the Power button on the
microphone has been turned on and
that the Music Volume (5) is turned up.
Check the instructions in the “Playback
and Music” section above to ensure
that your preferred mode is connected
properly (remember especially that you
may need to press the Mode button
(8) again to cycle through the correct
mode).
Check the AUX cable for damage,
folds or bends. If any are found, try a
dierent AUX cable.
If there is still no audio output, please
charge the microphone.
[Troubleshooting Guide]