User Manual

14 15
]Machine assembly[
]Machine assembly[
How to Assemble the Disco Ball:
1.
To attach the disco ball,
screw the pole clip screw
4
through the disco ball clasp
2
and the hole on the stand
clip
5
2.
Screw on both sides of the
disco ball
1
to the disco ball
clasp
2
with a side screw
3
on each side and tighten
them so that the disco ball
sits securely in place.
3.
Now that the entire holder is
constructed, attach it to the
microphone pole by clipping
the entire contraption on via
the disco ball stand clip
5
.
Disco Ball
Disco Ball Parts:
Disco Ball Disco Ball Clasp
2X Side Screws Pole Clip Screw
Stand Clip Power Plug
Wire Clips
1
3
5
7
2
4
6