User Manual

20 21
]Detailed usage guide[
]Detailed usage guide[
How to connect to an external battery source
To connect the machine to an external charging source such as
your car battery, plug in a compatible cable to your car and into
the DC12V Input on the machine.
How to record audio
To record, first insert a USB or MicroSD card into the machine’s
USB or MicroSD slots respectively. Once entered, click the REC
(Record) button on the machine or the machine’s remote control.
To stop recording, press the REC button again. The recorded
audio should start playing as soon as the REC button has been
clicked to stop recording.
How to charge a phone/tablet
To connect your device for charging only, plug a compatible USB
cable into the DC5V/2A port and into your device. Note that this
port is also used to power the disco ball cable.
Microphones
How to charge the microphones
Plug the MicroUSB and wall plug that are included into the bottom
of the microphone and an outlet. Be sure to charge fully before
each use. While charging, the top bar of the battery icon on the
display will flash, then stop flashing when the battery is full.
How to turn the microphones on
Turn on microphones using the power button on the handle. They
will automatically connect to the machine.
Note: Microphones will automatically turn o after 15 minutes of
no use.
How to set up the microphones
Make sure that each microphone is on a dierent frequency
(CHA, CHB, or MHz) by pressing and holding the A-B button on
the microphone handle.
Your frequency, channel, and battery level will display on the mic’s
LED screen.
How to customize your microphone vocal mix
To adjust the volume of your singing over the music, click the
Volume +/- buttons up or down until it reaches your preferred
volume.
To modify the reverb eect on your singing, click the Echo +/-
buttons up or down as desired. Use the EQ button to choose
between 5 dierent equalizer selections.
How to use PA and Mic Priority mode
When there is no music playing, the machine will automatically
start PA Mode. Simply use the microphones as directed above.
The Mic Priority mode automatically lowers the volume of the music
to an almost inaudible level when someone begins speaking into
the microphone.
To turn on/o Mic Priority mode while audio is playing from the
machine, press the Mic Prio button on the machine or the Prio
button on the machine’s remote control. The music’s volume will
return to normal as soon as the person stops speaking into the
microphone.