User Manual
18 19
]Detailed usage guide[
]Quick start guide[
Note: See the detailed “Usage Guide” section of this manual for more
information on how to operate your machine.
#1
Charge the machine and microphones before each use.
#2
Turn the machine and microphones on.
#3
Choose your preferred playback setting and begin blasting
your favorite tunes.
#4
Connect your device to display song lyrics.
#5
Rock on!
Ready, set, sing!
Quick start guide
Do not turn on the
microphones while they are
charging.
Use caution when charging
microphones in docks while
machine is unplugged.
Battery will deplete quickly.
Clean and store the machine
after each use.
Check the machine for
damage before each use.
Do not use the machine with
attachments not approved
by the manufacturer.
Keep the machine away from
heat, steam & water.
Machine
How to charge the machine
Connect the charging cable into the DC15V/2A port on the
machine and plug the other end into a polarized outlet. Be sure to
charge fully before each use. The indicator light on the top back
of the machine will turn on to indicate charging and power.
How to turn the machine and LED lights on
Turn on the Power switch on the machine’s function board by
toggling it to the right to turn the machine on with the LED lights
or to the left to turn on the machine without the LED lights.
The LED lights referred to are the ones on the machine itself. If the
disco ball is plugged in, it will turn on regardless of whether or not
the machine’s LED lights are on.
How to use TWS (True Wireless Stereo Mode) to connect another
machine
TWS mode allows for more than one Amasing Lento X5 Karaoke
Machine to be connected simultaneously. Once you have two
of the same models in close proximity to each other, select the
Bluetooth mode using the Mode button. Once in Bluetooth mode,
hold down on the button for a longer period of time until both
machines have entered the Bluetooth synchronization mode and
are linked to each other. To turn o this mode, press any button.
Please note that TWS mode allows for a range of up to 32 feet
from one machine to another in order to connect and work.
Never miss a note
Detailed usage guide