User's Manual

Root Chapter 3- Operation
www.masimo.com 63
Masimo
Audio Pause
Audio Pause temporarily suspends all audible alarms on Root. When it is active,
visual alarms are not impacted and will still display. The Audio Pause icon is
located on the left side of the Status Bar – do not confuse with the Sounds icon on
the right side of the Status Bar.
By default, Audio Pause is inactive, and the icon appears in the following way:
Audio Pause inactive
To activate Audio Pause, press the icon. It will turn red and the remaining Audio
Pause Duration time counts down next to the icon. The default duration for Audio
Pause is 120 seconds. In the example below, Audio Pause is activated, and there are
117 seconds left until Audio Pause is inactivated again.
To configure Audio Pause, see Sounds.
Audio Pause active. 117 seconds until Audio Pause is inactive.
Note: When Audio Pause is activated, powering off and then powering on Root will
return Audio Pause to its default inactive state.
Trend Download
Root can store up to 96 hours of trend data captured at 2-second intervals from
Radical-7, Radius-7 and MOC-9 modules. Trend data from Root can be transferred
to a computer via USB for evaluation.
Trend data is stored in non-volatile memory, so it is not erased when Root is shut
off. Trend data download is initiated using the Masimo Instrument Configuration
Tool, which converts the data to a .TXT or .CSV file.