User's Manual

www.masimo.com 23
Masimo
Chapter 2- Setting Up
Unpacking and Inspection
To unpack and inspect Root
1. Remove Root from the shipping carton and examine it for signs of
shipping damage or exposed electronics.
2. Check all materials against the packing list. Save all packing materials,
invoice and bill of lading. These may be required to process a claim with
the carrier.
3. Confirm that you have all components for the Root:
 Root
 AC Power Cord
If anything is missing or damaged, contact Masimo's Technical Service Department.
See Return Procedure.
Guidelines for Setting Up
Root has a built-in bracket interface that allows it to be mounted on a pole or roll
stand.
When setting up Root, follow these guidelines:
 Place on a stable, hard, flat and dry surface near the patient.
 Maintain a minimum of three (3) centimeters (one [1] inch) of free space
around Root.
 Ensure that the back panel Speaker is not covered to avoid a muffled
alarm sound.
 Charge Root's battery fully before use. See Initial Battery Charging.
Root should not be operated outside the environmental conditions listed in the
specifications section. See Environmental Specifications.