User's Manual

www.masimo.com 21 Masimo
Chapter 2: Setting Up
Unpacking and Inspection
To unpack and inspect Root
1. Remove Root from the shipping carton and examine it for signs of
shipping damage or exposed electronics.
2. Check all materials against the packing list. Save all packing
materials, invoice and bill of lading. These may be required to
process a claim with the carrier.
If anything is missing or damaged, contact Masimo's Technical Service
Department. See Return Procedure on page 91.
Guidelines for Setting Up
Root has a built-in bracket interface that allows it to be mounted on a pole or
roll stand.
When setting up Root, follow these guidelines:
 Place on a stable, hard, flat and dry surface near the patient.
 Maintain a minimum of three (3) centimeters (one [1] inch) of free
space around Root.
 Ensure that the back panel Speaker is not covered to avoid a
muffled alarm sound.
 Charge Root's battery fully before use. See Initial Battery
Charging on page 23.
Root should not be operated outside the environmental conditions listed in
the specifications section. See Environmental on page 79.