User's Manual
Table Of Contents
- About this Manual
- Product Description, Features and Indications for Use
- Safety Information, Warnings and Cautions
- Chapter 1- Technology Overview
- Signal Extraction Technology® (SET®)
- rainbow Pulse CO-Oximetry Technology
- rainbow Acoustic Monitoring™ (RAM™)
- In Vivo Adjustment™
- Signal IQ® (SIQ)
- Adaptive Threshold Alarm (ATA)
- FastSat® (FST®)
- Sensitivity Modes
- Chapter 2- System Components
- Chapter 3- Setup
- Chapter 4- Operation
- Chapter 5- Alarms and Messages
- Chapter 6- Troubleshooting
- Chapter 7- Specifications
- Measurement Range
- Accuracy
- Resolution
- Electrical
- Environmental
- Physical Characteristics
- Alarms
- Display Indicators
- EMC Compliance
- Safety Standards Compliance
- Radio Compliance
- Guidance and Manufacturer's Declaration- Electromagnetic Emissions
- Guidance and Manufacturer's Declaration- Electromagnetic Immunity
- Recommended Separation Distances
- Symbols
- Citations
- Chapter 8 - Service and Maintenance
- Appendix
- Index
Radius-7 Chapter 4- Operation
www.masimo.com 51 Masimo
SpCO Settings
About
An informational read-only screen appears with an explanation about SpCO
Alarms
Option Description Factory
Default
Configuration Options
High
Limit
High Limit is the upper threshold that
triggers an alarm.
10
2% to 98%, in steps of 1%,
or Off
When set to Off, alarm is
disabled
Low
Limit
Low Limit is the lower threshold that
triggers an alarm.
Off 1% to 97%, in steps of 1%,
or Off
When set to Off, alarm is
disabled.
In Vivo
Option Description Factory
Default
Configuration
Options
Enabled See In Vivo Adjustment™ on page 27 of the
Operator's Manual.
Off On or Off
Offset
Amount
See In Vivo Adjustment™ on page 27 of the
Operator's Manual.
0 when
turned On
± 9% in steps of ±
0.1%