User's Manual

Radius-7 Chapter 3- Setup
www.masimo.com 39 Masimo
Removing Radius-7 from Patient
To remove the Radius-7 from a patient, perform the following steps:
1. Disconnect sensor(s) from the Instrument Module.
2. Detach the end of the Armband strap from the Armband fabric.
3. Un-thread Armband strap from Instrument Module slot and remove the Radius-7
from the patient’s arm.
4. Press the Release Buttons on the Battery Module, and slide the Battery Module off
of the Instrument Module.
5. Undo the key of the Armband plastic and slide the Instrument Module away from
the Armband.
6. Dispose of the Armband according to local laws and regulations.
WARNING: Do not reuse the strap to avoid possible cross contamination.
7. Disinfect and clean the Battery Module and Instrument Module. See Cleaning on
page 81 of the Operator's Manual.
8. Return the Battery Module to the battery charging adapter for charging. See
Charging the Radius-7 Battery Module on page 36 of the Operator's Manual.
9. Store the Instrument Module in the Battery Pocket of the Battery Charging
Adapter.