User's Manual

Radical-7R Pulse CO-Oximeter Operator’s Manual 4-17

General

MENU ITEMS DESCRIPTION

FASTSAT

Select Yes to activate the FastSat algorithm. In the 2 and 4 seconds

averaging mode, the FastSat algorithm is automatically enabled.

SMART TONE

Select Ye s to activate the SmartTone function. This will allow the audible pulse to

continue to beep when the pleth graph shows signs of motion. Select NO to turn

off SmartTone.

PULSE TONE

Select YES to activate the Pulse Tone function. This will allow the audible

pulse to continue to beep upon each patient pulsation..

About

This displays the copyright and software versions of the Handheld and Docking Station.

MENU ITEMS

Masimo Corporation

Masimo SET Software Version

Handheld Software Version

D-Station Software Version

Configuration

MENU ITEMS DESCRIPTION

Line Frequency

Set to 50 or 60Hz.

Set to match regional power line frequency to allow for

cancellation of noise introduced by ﬂ uorescent lights and other

sources. Factory default is 60 Hz.

Rapid Desat Limit

Set to Off, -5 or -10.

When set to -5%, this feature overrides the Alarm Delay (audible

alarms silenced) and the instrument will alarm if SpO

rapidly falls to

5% or 10% below the alarm limit. Factory default is -5%

SpHb Cal

Set to Arterial or Venous.

This feature provides an SpHb (Arterial) or SpHb

(Venous)

value that displays on the main screen.

NOTE: The hemorheologic proﬁ le of arterial and venous blood

samples can vary

. To accommodate this difference, the

Radical-7R provides the option of displaying a SpHb parameter

that is based on either Arterial or Venous SpHb laboratory

blood sample draw.

Changes to SpHb are included in output data. SpOC

calculation will always be based on the arterial SpHb.

Operation