User's Manual

Radical-7R Pulse CO-Oximeter Operator’s Manual 2-11
2
Radical-7R Monitor Interface
In addition to being a full-featured Handheld and Standalone Pulse CO-Oximeter, the
Radical-7R Pulse CO-Oximeter’s unique SatShare interface links the Radical-7R Pulse
CO-Oximeter to most existing multiparameter patient monitors through the pulse oximetry
patient cable or SpO
2
input connector.
97
76
S
p
H
b
g
/
d
l
1
7
7
1
0
.0
S
p
O
C
■ Upgrades any approved and validated monitor to Masimo SET performance by
using the calculated SpO
2
and pulse rate determined by Radical-7R to simulate an
ideal waveform, which is sent to the validated multiparameter patient monitor.
■ Connects into the SpO
2
patient cable or SpO
2
input connector of the multiparameter
patient monitor.
CAUTIONS:
■ THE WAVEFORM DISPLAYED ON THE MULTIPARAMETER PATIENT MONITOR
IS A SIMULATED SIGNAL (NON-NORMALIZED). REFER TO THE RADICAL-7R
PULSE CO-OXIMETER DISPLAY FOR PATIENT WAVEFORM.
■ IF DISPLAYING THE SIMULATED WAVEFORM IS NOT DESIRABLE, IT IS
RECOMMENDED TO TURN OFF THE PLETHYSMOGRAPHIC WAVEFORM
DISPLAY ON THE MULTIPARAMETER MONITOR.
■ ONLY USE A SATSHARE CABLE THAT HAS A FERRITE BEAD INSTALLED.
■ ONLY SpO
2
AND PULSE RATE CAN BE DISPLAYED ON THE MULTIPARAMETER
MONITOR WITH SATSHARE.
System Description