User's Manual

Radical-7 Chapter 5: Configurations
www.masimo.com 90 Masimo
A third way, from the Main Menu screen, is by tapping the Profiles icon.
The Radical-7 stores three types of Profiles:
 Custom (Default)
Any changes to Alarm settings are retained after a power cycle.
 Adult
Any changes to Alarm settings are reset to pre-defined settings. The Adult profile
is the default profile after a power cycle.
 Neonatal
Any changes to Alarm settings are reset to pre-defined Neonatal defaults after a
power cycle.
After Custom values are changed by the user, the Radical-7 retains these values after a
power cycle. The Adult profile and the Neonatal profile can be changed to meet specific
hospital or instrument requirements. If the Alarm settings are changed by the user, then
these settings return to the instrument default values after it is powered down. A user can
also load configurations to the device, which can be enabled by using the Profile button.
Changing Profiles Settings
From the Profiles screen, change any of the following options:
Options
Description
Factory Default
Settings
User Configurable
Settings
Patient Type
Defines the patient
population for which the
device will operate. See
About Patient Types on
page 92.
Custom
Neonatal, Adult,
Custom, or Custom
1 to 5
Sensitivity
Modes
Defines the sensitivity level
for which the device will
operate. See Overview of
Sensitivity Modes on page
50.
APOD
MAX, APOD, or
NORM