Operator's Manual
Table Of Contents
- About this Manual
- Product Description
- Indications for Use
- Contraindications
- Warnings and Cautions
- Chapter 1: Technology Overview
- Signal Extraction Technology (SET)
- rainbow Pulse CO-Oximetry Technology®
- Pulse CO-Oximetry vs. Drawn Whole Blood Measurements
- General Description for Total Hemoglobin (SpHb)
- General Description for Total Arterial Oxygen Content (CaO2)
- General Description for Carboxyhemoglobin (SpCO)
- General Description for Methemoglobin (SpMet)
- General Description for Oxygen Reserve Index (ORI)
- SpCO, SpMet, and SpHb Measurements During Patient Motion
- rainbow Acoustic Monitoring (RAM) Technology
- Chapter 2: Radical-7 Descriptions
- Chapter 3: Setup
- Chapter 4: Operation
- Using the Touchscreen and Buttons
- Using Screen Lock
- Using the Home Button
- Standby and Power Off
- Navigating the Radical-7
- About the Display View
- Sensitivity Modes Overview
- Changing Sensitivity Modes
- Accessing the Main Menu
- Navigating the Main Menu
- Parameter Settings
- Chapter 5: Profiles
- Chapter 6: Alarms and Messages
- About Alarms
- Silencing the Alarms
- Adaptive Threshold alarm (ATA) Feature
- 3D Alarms
- Messages
- Replace Sensor Message
- Replace Cable Message
- Replace Adhesive Sensor Message
- Incompatible Sensor Message
- Incompatible Adhesive Sensor Message
- No Adhesive Sensor Connected Message
- Interference Detected Message
- SpO2 Only Mode Message
- RAM Check Sensor Message
- RAM Sensor Initializing Message
- Low Battery Message
- Low Perfusion Index Message
- Low Signal IQ Message
- Low SpCO SIQ Message
- Low SpMet SIQ Message
- Low SpHb SIQ Message
- Speaker Failure Message
- Invalid Parameter Alarm Message
- No Cable Connected Message
- No Sensor Connected Message
- Pulse Search Message
- Sensor Initializing Message
- Sensor Off Patient Message
- Incompatible Cable Message
- Near Expiration Message
- Chapter 7: Troubleshooting
- Chapter 8: Specifications
- Chapter 9: Service and Maintenance
- Appendix
- Index
Radical-7 Warnings and Cautions
www.masimo.com 25 Masimo
plethysmographic waveforms displayed on the Radical-7 should be used
for monitoring purposes.
Warning: Simultaneous use of SatShare and serial port is not supported.
Caution: To minimize electromagnetic interference, only use a SatShare
cable that has a ferrite bead installed.
Caution: During SatShare operation, alarms may be muted on the
Radical-7. Use the multi-parameter monitor for audible alarms during
SatShare operation.
Caution: Ensure Radical Docking Station is connected to AC power source
when charging Radical-7.
Caution: Do not connect to an electrical outlet controlled by a wall switch
or dimmer.
Note: SatShare signals are ideal simulated waveforms corresponding to
the calculated saturation and pulse rate values and do contain all of the
information contained in physiological waveforms. The multi-parameter
patient monitor decodes these signals into saturation and pulse rate
values.
Cleaning and Service Warnings and Cautions
Warning: Do not adjust, repair, open, disassemble, or modify Radical-7.
Injury to personnel or equipment damage could occur. Return Radical-7
for servicing.
Warning: Electrical Shock Hazard: The battery should be installed and/or
removed from the Radical-7 by qualified personnel only.