Operator's Manual
Table Of Contents
- About this Manual
- Product Description
- Indications for Use
- Contraindications
- Warnings and Cautions
- Chapter 1: Technology Overview
- Signal Extraction Technology (SET)
- rainbow Pulse CO-Oximetry Technology®
- Pulse CO-Oximetry vs. Drawn Whole Blood Measurements
- General Description for Total Hemoglobin (SpHb)
- General Description for Total Arterial Oxygen Content (CaO2)
- General Description for Carboxyhemoglobin (SpCO)
- General Description for Methemoglobin (SpMet)
- General Description for Oxygen Reserve Index (ORI)
- SpCO, SpMet, and SpHb Measurements During Patient Motion
- rainbow Acoustic Monitoring (RAM) Technology
- Chapter 2: Radical-7 Descriptions
- Chapter 3: Setup
- Chapter 4: Operation
- Using the Touchscreen and Buttons
- Using Screen Lock
- Using the Home Button
- Standby and Power Off
- Navigating the Radical-7
- About the Display View
- Sensitivity Modes Overview
- Changing Sensitivity Modes
- Accessing the Main Menu
- Navigating the Main Menu
- Parameter Settings
- Chapter 5: Profiles
- Chapter 6: Alarms and Messages
- About Alarms
- Silencing the Alarms
- Adaptive Threshold alarm (ATA) Feature
- 3D Alarms
- Messages
- Replace Sensor Message
- Replace Cable Message
- Replace Adhesive Sensor Message
- Incompatible Sensor Message
- Incompatible Adhesive Sensor Message
- No Adhesive Sensor Connected Message
- Interference Detected Message
- SpO2 Only Mode Message
- RAM Check Sensor Message
- RAM Sensor Initializing Message
- Low Battery Message
- Low Perfusion Index Message
- Low Signal IQ Message
- Low SpCO SIQ Message
- Low SpMet SIQ Message
- Low SpHb SIQ Message
- Speaker Failure Message
- Invalid Parameter Alarm Message
- No Cable Connected Message
- No Sensor Connected Message
- Pulse Search Message
- Sensor Initializing Message
- Sensor Off Patient Message
- Incompatible Cable Message
- Near Expiration Message
- Chapter 7: Troubleshooting
- Chapter 8: Specifications
- Chapter 9: Service and Maintenance
- Appendix
- Index
Radical-7 Index
www.masimo.com 228 Masimo
Settings • 72
Signal Extraction Technology
(SET) • 17
Signal IQ (SIQ) • 111
Signal IQ Indicators • 45, 46
Signal Processing • 25
Silencing the Alarms • 29, 39,
96, 99
Sounds • 43, 53, 69, 73, 100
SpCO Alarms • 66
SpCO Reading Displays as
Dashes • 113
SpCO Settings • 54, 66
SpCO, SpMet, and SpHb
Measurements During Patient
Motion • 23
Speaker Failure Message • 107
SpHb Alarms • 58
SpHb Settings • 54, 58
SpMet Alarms • 67
SpMet Settings • 54, 67
SpO2 Only Mode Message •
106
SpO2 Settings • 54, 56
SpO2 Values Do Not Correlate
With Clinical Assessment or
Arterial Blood Gas
Measurements • 112
SpOC Alarms • 68
SpOC Settings • 54, 68
Standalone • 31
Standalone Back Panel • 33, 37,
76
Standalone Front Panel • 32, 36
Standby and Power Off • 40
Successful Monitoring for ORI •
23
Successful Monitoring for SpCO
• 22, 107
Successful Monitoring for SpHb
• 21, 107
Successful Monitoring for SpMet
• 23
Successful Monitoring for SpO2,
PR, and PI • 18
Symbols • 124