Service manual

Rad-8 Signal Extraction Pulse Oximeter Service Manual
2-2
• USE THE CLEANING SOLUTION SPARINGLY. ALLOW THE UNIT
TO AIR DRY. EXCESSIVE SOLUTION CAN FLOW INTO THE
MONITOR AND CAUSE DAMAGE TO INTERNAL COMPONENTS.
• DO NOT TOUCH, PRESS OR RUB THE DISPLAY PANELS WITH
ABRASIVE CLEANING COMPOUNDS, INSTRUMENTS,
BRUSHES, ROUGH-SURFACE MATERIALS OR BRING THEM
INTO CONTACT WITH ANYTHING THAT COULD SCRATCH THE
PANEL.
• DO NOT USE PETROLEUM-BASED, ACETONE SOLUTIONS OR
OTHER HARSH SOLVENTS TO CLEAN THE OXIMETER. THESE
SUBSTANCES ATTACK THE DEVICE’S MATERIALS AND DEVICE
FAILURE CAN RESULT.