Operator's Manual

Rad-97 Chapter 4: Operation
www.masimo.com 95 Masimo
Sounds
Use the Sounds screen to control the volume of sounds and duration of audio pause on
Rad-97. Users can also access the Sounds screen by pressing the Sounds icon on the Status
Bar. See About the Status Bar on page 52.
Option Description Factory
Default
Settings
User Configurable
Settings
Alarm
Volume
Sets the alarm volume level.
4 (Highest
volume)
1 to 4 - Slide towards the
left to decrease volume
and to silence.
Pulse Tone
Volume
Sets the pulse tone volume level. 3
0 to 4 - Slide towards the
left to decrease volume
and to silence.
Audio Pause
Duration
Sets the length of time that the
audible alarm remains silenced,
when Audio Pause is enabled. See
Audio Pause on page 157.
2 minutes
1, 2, or 3 minutes,
Permanent *,**, or
Permanent with
Reminder *,***.
SmartTone Allows the audible pulse to continue
to beep when the pleth graph shows
signs of motion.
Off On or Off
* Requires user to have All Mute Enabled turned on in the Access Control menu. See Access
Control on page 107.
** If Permanent is selected, there will be no audible alarms, but visual alarms will still display.
*** If Permanent with Reminder is selected, a tone will sound every three (3) minutes as a
reminder that Permanent is active.