Operator's Manual

Rad-97 Chapter 4: Operation
www.masimo.com 80 Masimo
SpCO Alarms
From the Alarms screen, change any of the following options:
Options Description Alarm
Priority
Factory
Default
Settings
User Configurable
Settings
High Limit High Limit is the upper
threshold that triggers an
alarm.
High 10 2% to 98%, in steps
of 1%, or Off
When set to Off,
alarm is disabled
Low Limit Low Limit is the lower
threshold that triggers an
alarm.
Medium Off Off or 1% to 97%, in
steps of 1%
When set to Off,
alarm is disabled
Silence
Duration
Sets the amount of time
that the alarm is silenced.
NA 2 minutes 30 seconds, 1, 2, or 5
minutes
In Vivo for SpCO
In Vivo is currently not available in the U.S.A. and territories relying on FDA market
clearance.
From the In Vivo screen, access the following screens:
Options Description Factory Default
Settings
User Configurable
Settings
Enabled See In Vivo Adjustment
Overview on page 65.
Off On or Off
Offset
Amount
See In Vivo Adjustment
Overview on page 65.
0.0 when turned
on
-9.0% to +9.0% in steps
of 0.1%
ORi Settings
ORi is currently not available in the U.S.A. and territories relying on FDA market clearance.
From the ORi Settings screen, access the following screens:
ORi Alarms on page 81