Operator's Manual
Table Of Contents
- About This Manual
- Product Description, Features and Indications for Use
- Safety Information, Warnings and Cautions
- Chapter 1: Technology Overview
- Signal Extraction Technology® (SET®)
- rainbow Pulse CO-Oximetry Technology
- Pulse CO-Oximetry vs. Drawn Whole Blood Measurements
- General Description for Total Hemoglobin (SpHb)
- General Description for Total Arterial Oxygen Content (CaO2)
- General Description for SpOC
- General Description for Carboxyhemoglobin (SpCO)
- General Description for Methemoglobin (SpMet)
- General Description for Respiration Rate (RRp)
- General Description for Oxygen Reserve Index (ORi)
- SpCO, SpMet, and SpHb Measurements During Patient Motion
- rainbow Acoustic Monitoring™ (RAM™)
- Chapter 2: Description
- Chapter 3: Setting Up
- Chapter 4: Operation
- Using the Touchscreen and Home Button
- About the Main Screen
- About the System Status Light
- Accessing Main Menu Options
- rainbow Parameter Settings
- Parameter Settings
- Temperature Settings
- Noninvasive Blood Pressure (NIBP) Settings
- NomoLine Capnography Settings
- Sounds
- Device Settings
- About
- Trends
- Call
- Rad-97 Screenshot Capture
- Patient Admit/Discharge
- EMR Push
- Chapter 5: Profiles
- Chapter 6: Temperature
- Chapter 7: Noninvasive Blood Pressure (NIBP)
- Chapter 8: NomoLine Capnography
- Chapter 9: Video Conferencing
- Chapter 10: Admit to and Discharge from Patient SafetyNet
- Chapter 11: Electronic Medical Records (EMR) Push
- Chapter 12: Third-Party Devices
- Chapter 13: Alarms and Messages
- Chapter 14: Troubleshooting
- Chapter 15: Specifications
- Pulse CO-Oximetry Specifications
- Temperature Specifications
- Noninvasive Blood Pressure (NIBP) Specifications
- NomoLine Capnography Specifications
- Electrical
- Environmental
- Physical Characteristics
- Alarms
- Display Indicators
- Compliance
- Connectors
- Wireless Specifications
- Guidance and Manufacturer's Declaration-Electromagnetic Emissions
- Guidance and Manufacturer's Declaration-Electromagnetic Immunity
- Recommended Separation Distances
- Symbols
- Citations
- Chapter 16: Service and Maintenance
- Appendix: Concepts of Alarm Response Delay
- Index
www.masimo.com 151 Masimo
Chapter 12: Third-Party Devices
Bluetooth
Flexible measurement expansion is possible through the Rad-97 Bluetooth connection.
Rad-97 can display parameters and measurements captured by third-party technologies in an
all-in-one view on Rad-97. When a third-party device is connected, Rad-97 automatically
creates a window that displays all the data from that device on the Main Screen.
USB
To connect a USB device such as a barcode scanner, connect the device to the USB port on
the rear of Rad-97. The device should automatically connect and allow scanning of barcodes
for use when entering alphanumeric data such as clinician or patient data.
Connect Device to Rad-97
Connect an external device to Rad-97 using Bluetooth
1. Ensure Bluetooth is enabled on Rad-97. See Bluetooth on page 105.
2. Ensure Bluetooth is enabled on the external device; refer to the external device's
Operator's Manual if needed.
3. On the Rad-97 main screen, touch the Main Menu icon.
4. Press the Device Settings icon.
5. Press the Bluetooth icon.
6. On the Bluetooth screen:
• Press the Pair button for the desired external device.
• Select the desired external device under the Devices Found list.
The external device is now paired with Rad-97. Refer to the external device's
Operator's Manual for proper operation.