Operator's Manual

www.masimo.com 149 Masimo
Chapter 11: Electronic Medical Records
(EMR) Push
The Electronic Medical Record (EMR) Push feature allows clinicians to send validated patient
vitals data from Rad-97 directly to a Patient Data Management System, such as an Electronic
Medical Record (EMR).
Determining EMR Push is Active
The EMR Push icon appears at the bottom of the Rad-97 main screen when the EMR
Push feature is active. The EMR Push feature is active when a Rad-97 patient profile is
connected to a Patient SafetyNet server.
Note: The Patient SafetyNet server can be configured to require clinicians to provide access
credentials to activate the EMR Push feature. Refer to the System Policy Settings information
in the Operator's Manual for Patient SafetyNet for additional information.
Sending Patient Data to the EMR
Follow the instructions below to send patient data to a data management system using the
EMR Push feature. A patient must be admitted before EMR Push can be performed. See
Chapter 10: Admit to and Discharge from Patient SafetyNet on page 145.
Note: Parameters that appear on the EMR Push screen can be pre-configured on Patient
SafetyNet. Refer to the Operator's Manual for Patient SafetyNet for additional information.
1. Select the EMR Push icon at the bottom of the Rad-97 Main Screen.
2. It may be required to enter the user's PIN, the user's Name and PIN or the user's
Name and Password.Enter the required information and press OK.
Note: Username, PIN and Password requirements are enabled through Patient
SafetyNet. Refer to the System Policy Settings information in the Operator's
Manual for Patient SafetyNet for additional information.
3. In the EMR Push screen, press the Review button to review the data before
submitting to the EMR.
4. Press the Submit button to send patient data to the EMR or press the Back button
to return to the Main Screen.
5. After pressing the Submit button, select to send patient data to the
EMR.
6. The Successfully Sent Data to EMR confirmation screen displays. Press OK to close.