Operator's Manual

Rad-97 Chapter 10: Admit to and Discharge from Patient SafetyNet
www.masimo.com 147 Masimo
Not Monitoring Message
When the sensor is off the patient for an extended period of time, a Not Monitoring message
will appear on the screen. Acknowledge the message by pressing Cancel or Discharge. Press
Discharge to discharge the patient that is currently admitted on Rad-97, or press Cancel to
keep the same patient admitted.
Monitoring Resumed Message
When the sensor is taken off and placed back onto a patient, a Monitoring Resumed message
will appear on the Rad-97 screen.
If this is a new patient, press Discharge to discharge the previous patient. If the same patient
is being monitored, press Confirm to continue monitoring the same patient.
Discharging a Patient
1. Press the Discharge icon on the bottom left of the screen to open the Patient
screen.
2. Select the Discharge button on the bottom of the screen (see Fig. 4).
3. A confirmation message will appear (see Fig. 5).
4. Press Discharge to complete the discharge procedure.
Fig. 4 Fig. 5