Operator's Manual

www.masimo.com 145 Masimo
Chapter 10: Admit to and Discharge from
Patient SafetyNet
The Admit/Discharge icon is located in the bottom left of the screen and allows clinicians to
admit or discharge patient's on Masimo Patient SafetyNet directly from Rad-97.
Icon Description
Admit - Select to admit a patient.
Discharge - Indicates a patient is currently admitted. Select to discharge admitted
patient.
Note: In order to use this feature, Masimo Patient SafetyNet software V5.0.6.5 or higher is
required.
Not Admitted
A Not Admitted message will appear on the Rad-97 screen when the sensor is placed onto a
patient and a patient has not yet been admitted on Rad-97. Press the Admit button on the
screen to admit the patient or press Skip and the patient data will not be transmitted to
Patient Safety Net.
Admitting a Patient
1. Press the Admit icon on the bottom left of the screen to open the Patient
screen.
2. Select the patient name by pressing the Search button (see Fig. 1).
3. Select the patient's name from the list (see Fig. 2) or filter by typing the patient's
last name and selecting the patient from the filtered list.