Operator's Manual

Rad-97 Chapter 7: Noninvasive Blood Pressure (NIBP)
www.masimo.com 129 Masimo
4. To enable Stat mode, touch the Main Menu icon , then select NIBP Settings
.
On the Intervals screen, change Set Mode to Stat, and then select the desired Stat
Duration. See Intervals Settings for NIBP on page 88. The measurement site can
also be changed using the action menu.
WARNING: Too frequent blood pressure measurements can cause injury to the
patient due to blood flow interference.
5. To begin measurement, touch the Start Stat button and then press the arrow in
the top-left corner of the touchscreen to return to the Main Screen.
Note: A Stat Interval NIBP measurement can also be started directly from the
Action Menu in the NIBP window. See About the Action Menu on page 55.
6. Wait for measurement to complete or touch the Stop button to stop the
measurement.
Note: Once measurement is completed and values appear, the next measurement
will begin and repeat until duration time has elapsed.