Operator's Manual

Rad-97 Chapter 4: Operation
www.masimo.com 105 Masimo
* Displays when WPA Enterprise or WPA2 Enterprise is selected for security.
** Displays when any of the security options are selected.
Network Scan
To scan for and connect to an available wireless network, perform the following:
1. Press/select the search icon next to Manual Setup to display the Select a
Network screen. A network search is automatically performed and displays a list of
available wireless networks.
2. Select a wireless network from the list of available networks.
3. Depending on the security settings of the network, enter the username and/or the
password for the desired wireless network.
Note: The security settings are automatically configured.
4. Press/select the Save button to save the settings and connect to the wireless
network.
Bluetooth
Use the Bluetooth screen to enable or disable Bluetooth connectivity and connect with other
devices. When Bluetooth connectivity is enabled, the Bluetooth icon will appear in the Status
Bar. The user can also access the Bluetooth screen by pressing the Bluetooth icon on the
Status Bar. See About the Status Bar on page 52.
Option Description Factory
Default
Settings
User Configurable
Settings
Bluetooth
Enables or disables Bluetooth
connectivity.
Off On or Off
MAC Address Displays the Rad-97 MAC Address NA NA
Presence
Monitoring
Used in conjunction with MyView on
Masimo Patient SafetyNet (see the
Masimo Patient SafetyNet Operator's
Manual).
Off On or Off