Operator's Manual

Rad-97 Chapter 4: Operation
www.masimo.com 103 Masimo
Option Description Factory Default
Settings
User Configurable
Settings
Status
Displays connected wireless
network status.
NA
See Status on page
103.
Change
Network*
Allows device to be connected to a
different wireless network.
NA
See Change Network
on page 104.
* If the wireless network is changed for a device that is connected to Patient SafetyNet, that
device will no longer be connected to Patient SafetyNet when connected to a different
wireless network.
Selected Network
The Selected Network field displays the SSID of the currently connected wireless network.
Touching the info icon displays information about the current network such as the
device MAC and IP address, SSID of the network, security protocol, and the destination
address of a connected Patient SafetyNet system.
Note: If the device is not currently connected to a wireless network, to connect, see Change
Network on page 104.
Forget Network
The Selected network info screen also allows the user to Forget the network if the currently
connected wireless network is no longer needed. Scroll to the bottom of the screen and
press/select the Forget button.
CAUTION: There are no prompts to confirm the Forget network request. Once selected, the
network is disconnected and removed from Rad-97. If a connection to the same wireless
network is desired at a later time, the information to connect will need to be entered
manually.
CAUTION: If the device is currently connected to a Patient SafetyNet view station, when the
Forget network button is pressed/selected, the device will also disconnect from Patient
SafetyNet. Rad-97 parameters and alarms no longer display on the patient SafetyNet view
station or notification devices.
Status
The Status field displays the connection status of the wireless network. Touching the edit icon
allows the currently connected wireless network settings to be modified. A different
network can also be connected to directly if desired (when the SSID, network security type and
password are known) by entering the information directly. This may be helpful if the desired
network is hidden and not shown during a network scan.
Note: When a different network is connected, the current network settings are not saved.