Operator's Manual

Rad-97 Chapter 4: Operation
www.masimo.com 101 Masimo
Camera
Note: This feature is optional on Rad-97 devices.
Use the Camera screen to enable or disable camera connectivity. The camera icon appears in
the Status Bar regardless of camera settings. The user can also access the Camera screen by
touching the camera icon on the Status Bar. See About the Status Bar on page 52.
Option Description Factory Default
Setting
User Configurable
Settings
Video Conferencing
Enabled
Enables or disables video
conference capabilities.
On On or Off
The Status Bar will display different camera icons depending on selected settings (see About
the Status Bar on page 52), as follows:
Icon Description
Video Conference (Camera is inactive)
Video Conference (Camera is active)
Camera is disabled, either because:
• Video Conferencing is set to Off in Camera settings.
• Camera is disabled by the Rad-97 user (Video Conference only). See Controls
on page 139.
Note: Video conferencing functionalities may not be available under high ambient
temperature.
For complete information about audio/video communication, see Chapter 9: Video
Conferencing on page 139.