Operator's Manual

Root Chapter 3: Operation
www.masimo.com 88 Masimo
Option
Description
Factory
Default
Setting
Configurable
Settings
Save as Neo
Saves current profile
parameter as the
Neonatal Profile.
N/A
Press Save to
update the
profile.
Factory
Defaults
Options are restored to
factory value.
N/A
Press Restore.
*Changes to USB Ports baud rate will take effect after Root is power cycled,
turned off then on again.
Note: Restore Factory Defaults can only be performed during
non-monitoring and no cable connections are present.
Device Output
The Device Output screen allows the user to configure additional data
output options. A Nurse Call can be triggered based on alarm, low Signal IQ
events or both. In addition, Nurse Call Polarity can be inverted to
accommodate local Nurse Call station requirements.