Operator's Manual

Root Chapter 2: Setting Up
www.masimo.com 37 Masimo
Radical-7 Connection
It is recommended that Root be powered on before performing the steps
below.
1. Snap the Radical-7 into the Docking Station.
2. If the Radical-7 is not yet turned on, press the power button on the
Radical-7 to power it on.
3. When properly connected, the Radical-7 Charging Indicator light
will illuminate. An illuminated Radical-7 Battery icon will also
appear in the Status Bar. See About the Status Bar on page 45
4. Root display will show active measurements and parameters.
For Radical-7 charging conditions, see Radical-7 and Radius-7 Charging
Indicator on page 112.