Operator's Manual

Root Chapter 2: Setting Up
www.masimo.com 34 Masimo
 Charge Root's battery fully before use. See Initial Battery
Charging on page 35.
Root should not be operated outside the environmental conditions listed in
the specifications section. See Environmental on page 153.
Power On
The Power Button can be used for Power On, Sleep, and Power Off. To
Power On, press the Power Button for two (2) seconds until a single audible
tone sounds.
Once Root turns on, if no Radical-7, Radius-7, or MOC-9 module is
connected, the Root display shows the following message: Please Connect a
Device. The user is now able to connect Radical-7, Radius-7, and MOC-9
module.