Operator's Manual

www.masimo.com 33 Masimo
Chapter 2: Setting Up
Unpacking and Inspection
To unpack and inspect Root
1. Remove Root from the shipping carton and examine it for signs of
shipping damage or exposed electronics.
2. Confirm that you have all components for the Root by checking all
materials against the packing list:
 Root
 AC power cord
Note: Save all packing materials, invoice and bill of lading. These
may be required to process a claim with the carrier.
If anything is missing or damaged, contact Masimo's Technical Service
Department. See Return Procedure on page 177.
Guidelines for Setting Up
Root has a built-in bracket interface that allows it to be mounted on a pole
or roll stand.
When setting up Root, follow these guidelines:
 Place on a stable, hard, flat, and dry surface near the patient.
 Maintain a minimum of three (3) centimeters (one [1] inch) of free
space around Root.
 Ensure that the back panel speaker is not covered to avoid a
muffled alarm sound.