Operator's Manual

Root Chapter 3: Operation
www.masimo.com 109 Masimo
Downloading Screen Captures
To download screen captures:
1. Remove any sensors connected to the patient to stop monitoring,
and acknowledge any alarms triggered on Root.
Note: Before connecting the USB drive in the next step, there must
be a folder titled “screen_shot” in the USB drive with a FAT or
FAT32 system file to enable the download of the screen captures.
2. Plug the USB drive into the USB port located on the rear panel of
Root; the screen captures will automatically download. A status
message will display briefly at the top of the Root screen to
indicate the start of the download.
3. A confirmation status message will display briefly at the top of the
Root screen when the file transfer is complete.
4. Unplug the USB drive from Root.
To import the screen captures from the USB drive onto a computer, plug the
USB drive into the computers USB port, then open the folder titled
“screen_shot” (from the USB drive) on the computer to access the .png files.
Lights
System Status Lights
The System Status Lights provide visual indications of alarms and system
messages. The lights will illuminate in different colors depending on the
state of the device.
To locate the System Status Lights, see Side Views on page 30.