Operator's Manual

Root Chapter 3: Operation
www.masimo.com 104 Masimo
Session Management
Session Management, when enabled, allows clinicians to input a label
(session name) which will output with data downloaded from Root.
Enabling Session Management
To enable session management go to Devices Settings. Choose Access
Control then slide the Sessions Enabled button to the on position.
Starting Session Management
Press the session management icon on the Action Bar. Session Name
window will open in which you can label the session. When data is
downloaded from Root it can be identified by the label assigned to a
particular session. See About the Action Bar on page 49.
Note: When Session Management is enabled multiple sessions can be
recorded, not simultaneously but sequentially.
Ending Session Management
To end a session, go to the Action Bar, press the session management icon
with the timer overlay . End Session window will open. Push the End
button to end the session.
Note: The maximum time for a session is 96 hours.