Operator's Manual

Root NIBPT Chapter 2: Setting Up
www.masimo.com 49 Masimo
Attach the Temperature Probe
1. Hold the temperature probe cable connector with the spring tab
on the right and insert it into the probe port of the temperature
module.
2. Push the cable connector into place until it clicks.
3. Place probe cover onto the temperature probe and dock in the
probe well.
Attach NIBP Cuff
For a list of compatible NIBP patient hoses and cuffs, visit
http://www.masimo.com/ .
1. Attach an adapter to the end of the cuff hose (if necessary).
2. Connect blood pressure cuff to the NIBP Nib located on the side of
Root. See Chapter 5: NIBP Measurement on page 149.
Masimo Kite
Masimo Kite Software Application is a passive monitoring interface to
Point-of-Care (POC) Masimo medical devices (Root for example) that
co-exist under the same Wi-Fi network. Kite remotely displays system and
parameter status reported by the POC device on a separate monitor.
Root must be on the same network as Kite.
Note: If the device is not on the same network, it can be added, but Kite will
not be able to connect it to view the parameters monitored by that device
until both Kite and the device are connected to the same network.