Operator's Manual

Root NIBPT Chapter 2: Setting Up
www.masimo.com 48 Masimo
Nurse Call Connection
Use a Nurse Call connection cable to connect to a Nurse Call System.
To connect to a Nurse Call System
1. Identify the Nurse Call connection end (1/4 inch round female
connector) of the cable.
2. Insert the Nurse Call connection cable securely into the compatible
port on Root.
3. Depending on the connection type of the Nurse Call System, it may
be necessary to orient the other end of the Nurse Call connection
cable to fit correctly into the system connection.
4. For more information, see Device Output on page 116.
Attach the Probe Well
For a list of compatible temperature probes and accessories, visit
http://www.masimo.com/ .
1. Align the probe well with the tabs facing up and down and insert
the probe well into the temperature module.
Note: The probe well snaps into place when it is fully seated.
2. Insert the temperature probe into the probe well.