Operator's Manual

Root NIBPT Chapter 5: NIBP Measurement
www.masimo.com 159 Masimo
Press the Profile Name to select the desired patient profile.
3. Properly place the blood pressure cuff on patient. See Cuff Selection
and Placement on page 149.
4. To enable Stat mode, press the Main Menu icon , then select
NIBP Settings .
On the Intervals screen, change Set Mode to Stat , and then select
the desired Stat Duration. The set mode can also be changed using
the action menu.
WARNING: Too frequent blood pressure measurements can cause
injury to the patient due to blood flow interference.