Operator's Manual

Root NIBPT Chapter 4: Temperature Measurement
www.masimo.com 142 Masimo
Taking Temperature Measurement
1. Ensure that the correct measurement site is selected before
measurement.
Note: If a rectal probe is attached, the Site button will not
appear.
Note: The site selection toggle is disabled once the probe has
been placed on the site. The toggle will be re-enabled once the
probe has been returned to the probe well holder.
2. To change the measurement site, touch the Main Menu icon
, then select Temperature Settings .
Select Additional Settings , then select the desired
measurement site through Probe Mode. The measurement site
can also be changed using the action menu.