Manualshelf

Operator's Manual

ManualsBrandsMasimo ManualsElectronicsMWMII
121122123124125126127128129130
Root NIBPT Chapter 3: Operation
www.masimo.com 128 Masimo
Standby Mode
Standby Mode allows for patient monitoring to be temporarily suspended.
The Standby icon (see image below) is located in the top-left corner of the
screen.
To enable Standby Mode (suspend monitoring)
1. On Root, open the Access Control menu.
2. Swipe the standby enabled button to ON. Return to the home
screen on Root, and the Standby icon will appear on the screen in the
top-left corner.
3. Press the Standby icon, and a notification message will appear on the
screen indicating that monitoring is suspended (see image below).
To exit Standby Mode (resume monitoring)
Tap anywhere on the screen.
WARNING: When Root is in Standby Mode, monitoring is suspended and no
alarms will be active, with the exception of the low battery alarm.
Note: Standby Mode will not affect any devices using Root's Iris Connectivity
to Masimo Patient SafetyNet.