User's Manual

11
Preset Mode
Set multiple constructions by using preset channels. There are 4 preset groups. Excluding the
interference from external, there are 8 preprogrammed channels can be operated simultaneously
in each group.
Using the △ button to select the “PRESET”
mode.
Press channel button △ to change the
programmable group forward.
Press the “SET” button to lock the group
setting.
Press channel button △ to change the
programmable channel forward.
Press the set button to lock the channel
setting.
NOTE:When there is any outside interference on the current preset group, please switch to use
next preset group. If 4 preset groups are all under interference, please use auto-scan mode or
manual mode to set up system.
Press “SET” button for 2 seconds till LCD
display is flashing.
WIRELESS
SYSTEM OPERATION