User's Manual

1
2
3
4
ANT A
LINE
MIC
SQ
DC ONLY
12V 500mA
BALANCED
UNBALANCED
AUDIO OUT
Prior to setting up, please check that the transmitter and receiver are tuned to the same
channel. Two or more transmitters operating in the same channel can not be used at the
same time and area.
VOLUME
Connected the provided DC power supply to
the receiver power input with an appropriate
AC power source. The LED display will light
and the receiver is on.
Set the audio output level for
MIC: -20dB
LINE: 0dB (Default Setting)
Using the Volume Controller to adjust the AF
audio level to the input of the amplifier or mixer.
Never use the balanced and unbalanced audio
outputs at the same time! This may cause
signal loss or increased noise.
Using a standard audio cable with 3-pin XLR
connectors or 6.3mm phone plugs to connect
the mixer or amplifier.
Default Setting: In minimum VOLUME position.
7
Connecting the receiver
AC/DC
ADAPTER