Operating instructions

SETTING OPERASETTING OPERA

SETTING OPERA

TING MODE AND NEW COMBINATING MODE AND NEW COMBINA

TING MODE AND NEW COMBINA

TIONSTIONS

TIONS

SETTING OPERASETTING OPERA

SETTING OPERA

TING MODE ANDTING MODE AND

TING MODE AND

NEW COMBINANEW COMBINA

NEW COMBINA

TIONSTIONS

TIONS

Before you can set a new combination, you must select and set a mode of operation.

The X-07 has three modes of operation.

Single Combination Mode: The X-07 will open when one three-number combination

is successfully dialed.

Dual Combination Mode: Two separate combinations are required to open the X-

07. Either combination may be dialed first, however the operator must begin entering

the second combination within 40 seconds of entering the first combination.

Supervisory/Subordinate Mode or Super/Sub Mode: Two separate combinations

are required to open the lock, with the Supervisory Combination controlling access of

the Subordinate Combination. The Supervisory Combination must be entered first.

There can be unlimited delay between entering the Supervisory Combination and

entering the Subordinate Combination. There can also be unlimited openings by the

holder(s) of the Subordinate Combination until the Supervisory Combination is redi-

aled.

SETTING THE OPERASETTING THE OPERA

SETTING THE OPERA

TING MODETING MODE

TING MODE

Use the Change Key (photo 1) provided with your X-07 to set the desired operating

mode and combinations. If at any time during the process you see the Key and

Lightning Bolt symbols displayed (photo 2), stop the sequence and return to Step 3. If

at any time you see a Lightning Bolt symbol displayed (photo 3), stop and return to

Step 2.

1. Retract the bolt by entering the correct combination(s). In dual Combination or

Supervisory/Subordinate modes, you must enter both combinations.